2.4 Check out the detailed rating of racing track capabilities, engine performance, accident risk, etc. Compare with any other bike. Engine and transmission. Displacement. 249.0 ccm (15.19 cubic inches) Engine type. Twin, four-stroke. Compression. 11.6:1. Bore x stroke.
The complete engine number is just in one place: the rear right side of the crankcase, above the grounding bolt. There is a little start and end data missing here, but that should only put some of the list off by one model year for those years in which little information is available (early 1987, 1989, 1997, and 2000).
You are one click away from the EX250 Torque Values Page. This list is for the 1988-2007 model F. Note that there is a toggle up at the top, allowing you to choose which part of the bike you want to look at and which units you want to use. If you are looking for torque values for the newer (08+) J model, click here. Categories: Engine.
0-60 is 5.5 seconds , 1/4 is some where in the 15"s. if you go to the 1/4 calculator , put in the weight of the bike fully lubed, lets say 335 and thats conservative , a 170 pound rider , that adds up to 505 pounds , and type in the crank horsepower which is 27 horsepower on the 250 , the 1/4 time you come up with is 16.4 .
This Ninja is powered by a 248cc, 4-stroke, parallel twin, DOHC, engine that puts out quite a bit of power for being just under 250cc’s. It can run the 1/4 mile in 14.6 seconds at 88mph which isn’t as fast as other larger displacement bikes, but I think this is more than enough for the real world.sA8bX.